Alarm/Immobiliser - D7800

After over 150,000 units in the field, the engineers at DYNATRON believe that we have completed our testing of the D3000 range of immobilisers and alarms. The new 7 series of units will be launched in April 2002, complemented with the tried and tested Australian/New Zealands Standards. 

Like all DYNATRON alarm/immobilisers the D7800 is standards certified to AS/NZS 4601:1999. In this case the D7800 supports another standard .....AS/NZS 3749.1:1997 The D7800 certificate number is 20202041

D3800 vs D7800 In addition to all the features of the D3800, the D7800 incorporates a new intelligent microprocessor controlled battery back up siren. The siren has a linear “wind up wind down” frequency characteristic and has soft constant frequency long “chirps”. Fully compatible with our newly designed Fuzzy Logic Shock Sensor, signals from the sensor will warn off would-be thieves should they subject the vehicle to small impact (unsuccessfully attempting to break a window).

Remote controls are interrogated similarly to a transponder.

Interior light fades in and out during and after disarm.

DYNATRON D7800 FEATURES

• Code Hopping Random Encrypted remotes with 2 buttons with 4 functions.

• Ultra bright blue LED for transmit indication.

• The interior light on arm will dim out and slowly increase in brightness on disarm.

• If connected to central locking the doors will lock on ignition turn on and unlock on ignition turn off.

• Two sockets for both glass breakage and Shock, Attitude, Ultrasonic or Microwave sensors, are incorporated in the unit.

• Full diagnostic information is now available giving information on the last 3 triggers. 

• This information is retrievable via the remote control.

• The boot can now be released and the alarm turned off at the same time by depressing the second button for more than 2 seconds.

• New long life battery operation.

• Separate inputs for Doors, Boot Bonnet, Glass Breakage, Accessory.

• Two independent circuits of immobilisation via Siemens high quality relays.

• Negative output on armed.

• Auto Arming - 39 seconds after ignition turn off.

• Automatic passive disarm of immobilisation (built in Transponder type circuitry in remote control.

• Intelligent auto arm – If system has auto armed, the next push of the arm button locks the doors. (Saves pressing the button twice for door locks)

• Auto lock. Doors lock on ignition On and unlock on ignition Off. (Installer selectable)

• Auto Re-lock. If immobiliser disarmed and doors unlocked, doors will relock and immobiliser re-arm if no doors are opened within 120 seconds. (Installer selectable)

• Indicator confirmation for arm/disarm/

• Confirmation chirps from siren or horn. Constant tone soft chirp for D7800.

• Interior light dim out/brighten up on arm/disarm

• All immobilisation wires are via automotive spade terminals and have double wiring for safety.

• High security 50,000 combination PIN override.

• Panic/car locator feature.

• Full diagnostic information available for last 3 triggers via remote control

• Alarm/immobiliser/boot release via second button. 1.5 second push.

• Temporary chirp disable via second button short depression.

• Intelligent microprocessor controlled battery back-up siren with constant frequency soft chirps is incorporated in the D7800.

• Programmable central locking timing outputs (0.5 seconds or 3 seconds)

• Unit can learn up to 10 different remote controls.

• Turbo timer processor available. This allows an auto arming system to function with a turbo timer vehicle.

• Manufactured in an ISO 9002 facility to AS/NZS 4601:1997, as well as AS/NZS 3749.1-1997

Back To Products